Author Topic: RK 530 o-ring master link  (Read 957 times)

0 Members and 1 Guest are viewing this topic.

kaziff

  • Club Member
  • *****
  • Posts: 271
    • View Profile
RK 530 o-ring master link
« on: September 06, 2022, 08:32:23 PM »
Does anybody have a clip style RK brand 530 o-ring master link? I ordered a new o ring chain and it only came with the rivet style master link. guy

Dennis

  • Club Member
  • *****
  • Posts: 1726
    • View Profile
Re: RK 530 o-ring master link
« Reply #1 on: September 08, 2022, 04:39:48 PM »
I may.  I will check my stash.

Dennis

Sr.X

  • Forum Member
  • *
  • Posts: 246
    • View Profile
Re: RK 530 o-ring master link
« Reply #2 on: September 15, 2022, 03:27:51 PM »
In a sealed package even, except the sealed package is starting to leak a bit of the grease. If you come get it it’s yours.
Bob

kaziff

  • Club Member
  • *****
  • Posts: 271
    • View Profile
Re: RK 530 o-ring master link
« Reply #3 on: September 15, 2022, 05:23:05 PM »
thanks bob but a bit of a drive! will try to borrow olafs link riveter unless someone else has one available, oh and a heads up, new chains ordered only come with rivet style master

Theo

  • Club Member
  • *****
  • Posts: 222
    • View Profile
Re: RK 530 o-ring master link
« Reply #4 on: September 15, 2022, 11:50:11 PM »
I'll look a little for carefully this time. If I don't have a link, I have a tool.

Theo

SuperFly

  • Forum Member
  • *
  • Posts: 58
    • View Profile
    • Machine
Re: RK 530 o-ring master link
« Reply #5 on: September 16, 2022, 06:05:55 AM »


             I purchased this one from Amazon last spring to have as spare on trip to kootenays :

           https://www.amazon.ca/gp/product/B00SYLVJQQ/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

            have not used it yet...so can not say for sure if it is a good product for your application


kaziff

  • Club Member
  • *****
  • Posts: 271
    • View Profile
Re: RK 530 o-ring master link
« Reply #6 on: September 18, 2022, 08:10:27 AM »
thanks fpr the replys, i borrowed a link rivet tool from a club member and should be good to go.